Vinyl industrial trunking 689

CAINOX industrial channel for vinyl flooring reference 689

Technical specifications
  • Manufactured in stainless steel AISI304 or AISI316L andwith a pickled finish, in 1.5 / 2 mm thick plate. TIG welding is used.
  • The slope will depend on the length and can vary between 0.5 and 1%.
  • The type of grating will vary according to the type of load the channel has to support.
  • Top frame with vinyl flooring profile. The vinyl film is attached to the channel profile. It allows a watertight watertight connection between the gutter and the vinyl-covered floor. vinyl layer.
  • Optional filling of the channel perimeter profile with epoxy resin to prevent deformation in case of heavy loads.
  • They are manufactured in sections that are joined together with stainless steel flanges and bolts and EPDM gaskets. Anchoring feet and levelling screws are included.

Outlet with attached sump

We have vertical and horizontal siphonic outlets, with flow rates from 1.5 l/s to 13.90 l/s by means of drains or direct tubular outlets, depending on the needs of each project.

Direct exit

Direct tubular outlets are also available according to the needs of each project.

Removable siphon and basket

Drainage points can be fitted with a siphon and solids collection basket, both of which are removable for easy cleaning.

Technical data:

Vinyl flooring channel

Detail of vinyl clamping

Jointing of sections with EPDM gaskets

Flanges

Leveling feet

Filling of the profile with epoxy resin

Types of grilles:

RA11

Perforated
Load class L15/A15

RA13

Lattice
Mesh 25×25
Load class L15/M125 (according to plate thickness)

RA13ANTI

Non-slip mesh
Mesh 25×25
Load class L15/M125 (depending on plate thickness)

RA14

Slotted
Cover 10 mm thick
Load class M125/C250

RA15

Bars
Load class M125/C250 (depending on bar thickness)

RA18

Anti-slip bars
Load class L15

RA18ANTI

Anti-slip bars
Load class L15