The semi-industrial drains, manufactured in AISI 304 and AISI 316L stainless steel, are designed to be installed in indoor and outdoor areas, where a specific evacuation flow rate is required, but, being able to support heavy loads, load class M125.
Their low headroom design makes them suitable for locations where there are such limitations, while maintaining the water retention necessary to avoid unpleasant odours.
They incorporate an integrated siphon, vertical and horizontal outlets, shot-blasted finish and the possibility of a bolted version, depending on requirements.
Thanks to their high resistance, they are ideal for car parks, commercial areas, terraces...
Semi-Industrial Tiled / Continuous Drains
Siphonic drain 150×150 mm Vertical outlet Ø50
Siphonic drain 150×150 mm with basket Horizontal outlet Ø40
Siphonic drain 200×200 mm Vertical outlet Ø63
Siphonic drain 200×200 mm low level, with basket Vertical outlet Ø63
Siphonic drain 200×200 mm with basket Horizontal outlet Ø63,5
Siphonic drain 250×250 mm with basket Vertical outlet Ø80
Siphonic drain 250×250 mm with basket Vertical Outlet Ø80
Siphonic drain 250×250 mm with basket Horizontal outlet Ø80
Siphonic drain 300×300 mm with basket Vertical outlet Ø110
Siphonic drain 300×300 mm with basket Vertical Outlet Ø110
Siphonic drain 300×300 mm with basket Horizontal outlet Ø110
Siphonic drain 300×300 mm with basket Horizontal Outlet Ø110
Pavement drains Resin
Siphonic drain Ø100 mm Vertical Outlet Ø40
Siphonic drain Ø260 mm with basket Vertical Outlet Ø110
Siphonic drain Ø285 mm with basket Vertical Outlet Ø110