Grooved gutter for vinyl flooring reference 679
CAINOX type 679 grooved gutter for vinyl flooring.
- Manufactured in stainless steel AISI304 or AISI316L and with apickled finish, in 1.5 / 2 mm thick plate. TIG welding is used.
- The slope will depend on the length and can vary between 0.5 and 1%.
- To avoid possible deformations in case of heavy loads, the gutter profile and the gully perimeter are filled with epoxy resin and rods are incorporated to stabilise the gutter.
- They are manufactured in 3 meter lengths and are joined with stainless steel flanges and bolts and EPDM gaskets. Anchoring legs and leveling screws are included.
Outlet with attached sump
We have vertical and horizontal siphonic outlets, with flow rates from 1.5 l/s to 13.90 l/s by means of 20×20, 25×25, 30×30 and 40×40 cm coupled drains.
Removable siphon and basket
Drainage points can be fitted with a siphon and solids collection basket, both of which are removable for easy cleaning.
Technical data:
Vinyl flooring gutter
Jointing of sections with EPDM gaskets
Detail of vinyl clamping
Filling of the profile with epoxy resin
Types of grilles:
RA11
Perforated Anti-slip
Load class L15
Load class L15
RA13
Lattice plate
Load class L15
Load class L15
RA13ANTI
Non-slip lattice
Load class L15
Load class L15
RA14
Slotted
Load class M125
Load class M125
RA15
of platens
Load class M125
Load class M125
RA15ANTI
of Anti-skid Plates
Load class M125
Load class M125
RA18
Hygienic plate
Light Traffic
Light Traffic
RA18ANTI
Hygienic Anti-slip
Light Traffic
Light Traffic