CAINOX industrial channel for concrete and tiled floors reference 699
-
Manufactured in stainless steel AISI304 or AISI316L and with a pickled finish, in 1.5 / 2 mm thick plate. TIG welding is used.
-
The slope will depend on the length and can vary between 0.5 and 1%.
-
The type of grating will vary according to the type of load the channel has to support.
-
Optional filling of the channel perimeter profile with epoxy resin to prevent deformation in case of heavy loads.
-
They are manufactured in sections that are joined together with stainless steel flanges and bolts and EPDM gaskets. Anchoring feet and levelling screws are included.
Outlet with attached sump
We have vertical and horizontal siphonic outlets with flow rates from 1.5 l/s to 13.90 l/s, depending on the needs of each project.
Direct tubular outlet
Direct tubular outlets are also available according to the needs of each project.
Removable siphon and basket
Drainage points can be fitted with a siphon and solids collection basket, both of which are removable for easy cleaning.
Technical data:
Channel
Jointing of sections with EPDM gaskets
Flanges
Leveling feet
Filling of the profile with epoxy resin
Types of grilles:
RA11
Load class L15/A15
RA13
Mesh 25×25
Load class L15/M125 (according to plate thickness)
RA13ANTI
Mesh 25×25
Load class L15/M125 (depending on plate thickness)
RA14
Cover 10 mm thick
Load class M125/C250
RA15
Load class M125/C250 (depending on bar thickness)
RA15ANTI
Load class M125
RA18
Load class L15
RA18ANTI
Load class L15
Reference projects
