Flanged sleeve 100-116 mm part number 9043106987
Flexible sleeve designed for the connection of two wastewater pipes with the same or very similar diameter or of the same or different materials and/or surfaces. Suitable for vertical and horizontal installation, outdoor and indoor and can be combined with each other. Made of EPDM, a material resistant to extreme temperatures (from -40° to +120° C) and UV rays. AISI316L stainless steel clamps, resistant to acids, are incorporated at the ends for a better fastening. Very easy to install. Suitable for pipe sizes from Ø40 to Ø50 mm.
Technical data:
|
Reference |
9043106987 |
|
Material |
EPDM |
|
Version |
Approved for concealed installation. |
|
Pressure Flow Temp. |
0.6 bar |
|
Output dimension |
100-116 mm |
|
Function |
Transition Board |
Example of installation:
To connect to sewage pipes with different materials and different outside diameters, use the adapter sleeve.
Slightly loosen the fastening bands.
Push the adapter sleeve over the first clean tube and tighten the clamp.
Push the smaller tube into the adapter coupling (use lubricant if necessary) and tighten the second clamp.
Installation completed.